Language: 

select

United States Toll Free: +1(855)808-4171

International Callers: +1(305)551-4215

Sales@AmericanSpecialMetals.com

Search Products:
a
REQUEST A QUOTE
select

Monel® Alloy K-500

Common Trade Names: 
Monel K-500; Alloy K-500; Nickel K-500;

Monel® Alloy K-500 (UNS N05500/ W.Nr. 2.4375) is a nickel-copper alloy which combines the excellent corrosion resistance of MONEL® alloy 400 with the added advantages of greater strength and hardness. The increased properties are obtained by adding aluminum and titanium to the nickel-copper base, and by heating under controlled conditions so that submicroscopic particles of Ni3 (Ti, Al) are precipitated throughout the matrix. The thermal processing used to effect precipitation is commonly called age hardening or aging. 

Typical applications for Monel® Alloy K-500 products are chains and cables, fasteners and springs for marine service; pump and valve components for chemical processing; doctor blades and scrapers for pulp processing in paper production; oil well drill collars and instruments, pump shafts and impellers, non-magnetic housings, safety lifts and valves for oil and gas production; and sensors and other electronic components.

Available Product Forms: 
Pipe, tube, sheet, strip, plate, round bar, flat bar, forging stock, hexagon and wire.
Bookmark and Share

Specifications

MONEL® alloy K-500 is designated as UNS N05500 and Werkstoff Nr. 2.4375. It is listed in NACE MR-01-75 for oil and gas service.

Plate, Sheet, and Strip: BS3072NA18 (Sheet and Plate), BS3073NA18 (Strip), QQ-N-286 (Plate, Sheet and Strip), DIN 17750 (Plate, Sheet and Strip), ISO 6208 (Plate, Sheet and Strip).

Bar, Rod, Wire, and Forgings: BS3075NA18 (Wire), BS3076NA18 (Rod and Bar), ASTM B 865 (Rod and Bar), DIN 17752 (Rod and Bar), DIN 17753 (Wire), DIN 17754
(Forgings), QQ-N-286 (Rod, Bar, Wire, and Forgings), SAE AMS 4676 (Rod and Bar), ASME Code Case 1192 (Rod and Bar), ISO 9723 (Bar), ISO 9724 (Wire), ISO
9725 (Forgings) 

Pipe and Tube: BS3074NA18 (Seamless Pipe and Tube), DIN 17751 (Pipe and Tube)
Other Products - DIN 17743 (Chemical Composition), SAE AMS 4676 (Chemical Composition), QQ-N-286 (Chemical Composition)

Trademark Notice: Some names are trade names and/or trademarks of specific manufacturers. American Special Metals, Corp. is not affiliated with any manufacturer(s). Orders will be filled to meet specifications from any available source(s). Names are listed solely for reference to help identify products consistent with listed specifications.

Monel® Alloy K-500 is a Registered Trademark of Special Metals Corporation and Its subsidiaries.

American Special Metals, Corp. makes all reasonable efforts to ensure the accuracy and correctness of the data in this document but makes no representations or warranties as to the data’s accuracy, correctness or reliability. All data are for general information only and not for providing design advice. It is the responsibility of the user to test specific alloys under actual service conditions to determine their suitability for a particular purpose.

Chemical Composition

Limiting Chemical Composition, %  by Weight  

Nickel (plus Cobalt).....................................................63.0 min.

Carbon........................................................................0.25max.

Manganese...................................................................1.5 max.

Iron................................................................................2.0max.

Sulfur..........................................................................0.01max.

Silicon...........................................................................0.5max.

Copper......................................................................27.0 -33.0

Aluminum..................................................................2.30 - 3.15

Titanium....................................................................0.35 - 0.85
CONNECT WITH US
Copyright © 2015 American Special Metals, Corp. Web Design By Netrostar