INCONEL 617
Inconel Alloy 617 A nickel-chromium-cobalt-molybdenum alloy with an
exceptional combination of metallurgical stability, strength, and
oxidation resistance at high temperatures. Resistance to oxidation is
enhanced by an aluminum addition. The alloy also resists a wide
range of corrosive aqueous environments. Used in gas turbines for
combustion cans, ducting, and transition liners; for petrochemical
processing; for heat-treating equipment; and in nitric acid production.
UNS: N06617
W.Nr.: 2.4663a
Technical Bulletin
Available Product Forms: Pipe, tube, sheet, strip, plate, round bar, flat
bar, forging stock, hexagon and wire
Inconel Alloy 617 A nickel-chromium-cobalt-molybdenum alloy with an
exceptional combination of metallurgical stability, strength, and
oxidation resistance at high temperatures. Resistance to oxidation is
enhanced by an aluminum addition. The alloy also resists a wide
range of corrosive aqueous environments. Used in gas turbines for
combustion cans, ducting, and transition liners; for petrochemical
processing; for heat-treating equipment; and in nitric acid production.
UNS: N06617
W.Nr.: 2.4663a
Technical Bulletin
Available Product Forms: Pipe, tube, sheet, strip, plate, round bar, flat
bar, forging stock, hexagon and wire
American Special Metals is an independent distributor, and is not a representative or authorized distributor for any
manufacturer, brand or tradename, trademark listed on this site. All logos, tradenames and/or trademarks belong to their
respective holders.
American Special Metals es un Distribuidor Independiente, tanto el logo, como el nombre comercial y la marca registrada y
patentes de los productos presentados en este sitio de Internet pertenecen a sus respectivos dueños y no a nosotros.
American Especial Metals aclara no ser un representante exclusivo de los nombres comerciales o marca registrada, Todos
los logos, nombres comerciales y/o marcas registradas pertenecen a sus respectivos dueños.
manufacturer, brand or tradename, trademark listed on this site. All logos, tradenames and/or trademarks belong to their
respective holders.
American Special Metals es un Distribuidor Independiente, tanto el logo, como el nombre comercial y la marca registrada y
patentes de los productos presentados en este sitio de Internet pertenecen a sus respectivos dueños y no a nosotros.
American Especial Metals aclara no ser un representante exclusivo de los nombres comerciales o marca registrada, Todos
los logos, nombres comerciales y/o marcas registradas pertenecen a sus respectivos dueños.
Monel, Inconel, Incoloy, and Nilo are Registered Trademarks of
Special Metals Corporation and Its subsidiaries
Special Metals Corporation and Its subsidiaries
 |  |  |  |  |  |  |  |
| Corporate Headquarters American Special Metals, Corp. 11890 S.W. 8th Street Penthouse VII Miami, Florida 33184-1717 Telephone: (305) 551-4215 Fax: (305) 551-3436 E-Mail: info@americanspecialmetals.com |
INCONEL alloys
INCONEL alloy 600
INCONEL alloy 601
INCONEL alloy 601GC
INCONEL alloy 603XL
INCONEL alloy 617
INCONEL alloy 625
INCONEL alloy 625LCF
INCONEL alloy 686
INCONEL alloy 690
INCONEL alloy 693
INCONEL alloy 706
INCONEL alloy 718
INCONEL alloy 718SPF
INCONEL alloy 725
INCONEL alloy 740
INCONEL alloy X-750
INCONEL alloy 751
INCONEL alloy MA754
INCONEL alloy MA758
INCONEL alloy 783
INCONEL alloy N06230
INCONEL alloy C-276
INCONEL alloy G-3
INCONEL alloy HX
INCONEL alloy 22
 |
 |
 |
 |
 |
INCONEL alloy 617 is designated as
UNS N06617
Werkstoff Nr. 2.4663a.
Allowable design stresses for ASME Boiler and Pressure Vessel
Code construction are defined in ASME Code Cases 1956 and 1982.
Rod, Bar, Wire, and Forging Stock
ASTM B166/ASME SB 166 (Rod, Bar and Wire), ASTM B 564/ASME SB
564 (Forgings), SAE AMS 5887 (Bars, Forgings and Rings), VdTÜV
485 (Sheet, Plate, Bar and Tubing), ISO 9724 (Wire), DIN 17752 (Rod
and Bar), DIN 17753 (Wire), DIN 17754 (Forgings)
Plate, Sheet, and Strip
ASTM B 168/ASME SB 168 (Plate, Sheet and Strip), SAE AMS 5888
(Plate), SAE AMS 5889 (Sheet and Strip), VdTÜV 485 (Sheet, Plate,
Bar and Tubing), ISO 6208 (Plate, Sheet and Strip), DIN
17750 (Plate, Sheet and Strip)
Pipe and Tube
VdTÜV 485 (Sheet, Plate, Bar, and Tubing), ISO 6207 (Tubing), ASTM
B 546/ASME SB 546 (Pipe), DIN 17751 (Pipe and Tube) Composition
- DIN 17744
Welding Products
INCONEL Filler Metal 617 - AWS A5.14/ERNiCrCoMo-1; INCONEL
Welding Electrode 117- AWS A5.11 / ENiCrCoMo-1
UNS N06617
Werkstoff Nr. 2.4663a.
Allowable design stresses for ASME Boiler and Pressure Vessel
Code construction are defined in ASME Code Cases 1956 and 1982.
Rod, Bar, Wire, and Forging Stock
ASTM B166/ASME SB 166 (Rod, Bar and Wire), ASTM B 564/ASME SB
564 (Forgings), SAE AMS 5887 (Bars, Forgings and Rings), VdTÜV
485 (Sheet, Plate, Bar and Tubing), ISO 9724 (Wire), DIN 17752 (Rod
and Bar), DIN 17753 (Wire), DIN 17754 (Forgings)
Plate, Sheet, and Strip
ASTM B 168/ASME SB 168 (Plate, Sheet and Strip), SAE AMS 5888
(Plate), SAE AMS 5889 (Sheet and Strip), VdTÜV 485 (Sheet, Plate,
Bar and Tubing), ISO 6208 (Plate, Sheet and Strip), DIN
17750 (Plate, Sheet and Strip)
Pipe and Tube
VdTÜV 485 (Sheet, Plate, Bar, and Tubing), ISO 6207 (Tubing), ASTM
B 546/ASME SB 546 (Pipe), DIN 17751 (Pipe and Tube) Composition
- DIN 17744
Welding Products
INCONEL Filler Metal 617 - AWS A5.14/ERNiCrCoMo-1; INCONEL
Welding Electrode 117- AWS A5.11 / ENiCrCoMo-1