INCONEL 600
Inconel Alloy 600 A nickel-chromium alloy with good oxidation
resistance at high temperatures and resistance to chloride-ion
stress-corrosion cracking, corrosion by high-purity water, and caustic
corrosion. Used for furnace components, in chemical and food
processing, in nuclear engineering, and for sparking electrodes.
UNS: N06600
W.Nr.: 2.4816
Technical Bulletin
Available Product Forms: Pipe, tube, sheet, strip, plate, round bar, flat
bar, forging stock, hexagon, wire and extruded section
Inconel Alloy 600 A nickel-chromium alloy with good oxidation
resistance at high temperatures and resistance to chloride-ion
stress-corrosion cracking, corrosion by high-purity water, and caustic
corrosion. Used for furnace components, in chemical and food
processing, in nuclear engineering, and for sparking electrodes.
UNS: N06600
W.Nr.: 2.4816
Technical Bulletin
Available Product Forms: Pipe, tube, sheet, strip, plate, round bar, flat
bar, forging stock, hexagon, wire and extruded section
American Special Metals is an independent distributor, and is not a representative or authorized distributor for
any manufacturer, brand or tradename, trademark listed on this site. All logos, tradenames and/or trademarks
belong to their respective holders.
American Special Metals es un Distribuidor Independiente, tanto el logo, como el nombre comercial y la marca
registrada y patentes de los productos presentados en este sitio de Internet pertenecen a sus respectivos dueños
y no a nosotros. American Especial Metals aclara no ser un representante exclusivo de los nombres comerciales o
marca registrada, Todos los logos, nombres comerciales y/o marcas registradas pertenecen a sus respectivos
dueños.
any manufacturer, brand or tradename, trademark listed on this site. All logos, tradenames and/or trademarks
belong to their respective holders.
American Special Metals es un Distribuidor Independiente, tanto el logo, como el nombre comercial y la marca
registrada y patentes de los productos presentados en este sitio de Internet pertenecen a sus respectivos dueños
y no a nosotros. American Especial Metals aclara no ser un representante exclusivo de los nombres comerciales o
marca registrada, Todos los logos, nombres comerciales y/o marcas registradas pertenecen a sus respectivos
dueños.
Monel, Inconel, Incoloy, and Nilo are Registered Trademarks of
Special Metals Corporation and Its subsidiaries
Special Metals Corporation and Its subsidiaries
 |  |  |  |  |  |  |  |
 |
 |
 |
 |
 |
| Corporate Headquarters American Special Metals, Corp. 11890 S.W. 8th Street Penthouse VII Miami, Florida 33184-1717 Telephone: (305) 551-4215 Fax: (305) 551-3436 E-Mail: info@americanspecialmetals.com |
INCONEL alloys
INCONEL alloy 600
INCONEL alloy 601
INCONEL alloy 601GC
INCONEL alloy 603XL
INCONEL alloy 617
INCONEL alloy 625
INCONEL alloy 625LCF
INCONEL alloy 686
INCONEL alloy 690
INCONEL alloy 693
INCONEL alloy 706
INCONEL alloy 718
INCONEL alloy 718SPF
INCONEL alloy 725
INCONEL alloy 740
INCONEL alloy X-750
INCONEL alloy 751
INCONEL alloy MA754
INCONEL alloy MA758
INCONEL alloy 783
INCONEL alloy N06230
INCONEL alloy C-276
INCONEL alloy G-3
INCONEL alloy HX
INCONEL alloy 22
| Chemical Composition % for Inconel Alloy 600 |
|
Note: These alloys can be specified to more restrictive compositions
on a specific order basis.
on a specific order basis.
INCONEL alloy 600 is designated as
UNS N06600
Werkstoff Number 2.4816.
The alloy is approved under the Boiler and Pressure Vessel Code of
the American Society of Mechanical Engineers. It is approved under
Section I (Power Boilers), Section III (Nuclear Vessels), and Section
VIII (Pressure Vessels). Allowable design stresses are found in
Section II, Part D. Section I coverage is provided by Code Case 1827.
Rod, Bar, Wire and Forging Stock
ASTM B 166/ASME SB 166, ASTM B 564/ASME SB 564, ASME Code
Cases 1827 and N-253, SAE/AMS 5665 and 5687, BS 3075NA14
and 3076NA14, DIN 17752, 17753 and 17754, ISO 9723, 9724, and
9725, MIL-DTL-23229, QQ-W-390.
Plate, Sheet and Strip
ASTM B 168/ASME SB 168, ASTM B 906/ASME SB 906, ASME Code
Cases 1827 and N-253, SAE/AMS 5540, BS 3072NA14 and
3073NA14, DIN 17750, ISO 6208, EN 10095, MIL-DTL-23228.
Pipe and Tube
ASTM B 167/ASME SB 167, ASTM B 163/ASME SB 163, ASTM B
516/ASME SB 516, ASTM B 517/ASME SB 517, ASTM B 751/ASME
SB 751, ASTM B 775/ASME SB 775, ASTM B 829/ASME SB 829,
ASME
Code Cases 1827, N-20, N-253, and N-576, SAE/AMS 5580, DIN
17751, ISO 6207, MIL-DTL-23227
Other - ASTM B 366/ASME SB 366, DIN 17742, ISO 4955A, AFNOR
NC15Fe
UNS N06600
Werkstoff Number 2.4816.
The alloy is approved under the Boiler and Pressure Vessel Code of
the American Society of Mechanical Engineers. It is approved under
Section I (Power Boilers), Section III (Nuclear Vessels), and Section
VIII (Pressure Vessels). Allowable design stresses are found in
Section II, Part D. Section I coverage is provided by Code Case 1827.
Rod, Bar, Wire and Forging Stock
ASTM B 166/ASME SB 166, ASTM B 564/ASME SB 564, ASME Code
Cases 1827 and N-253, SAE/AMS 5665 and 5687, BS 3075NA14
and 3076NA14, DIN 17752, 17753 and 17754, ISO 9723, 9724, and
9725, MIL-DTL-23229, QQ-W-390.
Plate, Sheet and Strip
ASTM B 168/ASME SB 168, ASTM B 906/ASME SB 906, ASME Code
Cases 1827 and N-253, SAE/AMS 5540, BS 3072NA14 and
3073NA14, DIN 17750, ISO 6208, EN 10095, MIL-DTL-23228.
Pipe and Tube
ASTM B 167/ASME SB 167, ASTM B 163/ASME SB 163, ASTM B
516/ASME SB 516, ASTM B 517/ASME SB 517, ASTM B 751/ASME
SB 751, ASTM B 775/ASME SB 775, ASTM B 829/ASME SB 829,
ASME
Code Cases 1827, N-20, N-253, and N-576, SAE/AMS 5580, DIN
17751, ISO 6207, MIL-DTL-23227
Other - ASTM B 366/ASME SB 366, DIN 17742, ISO 4955A, AFNOR
NC15Fe