Haynes 25 (L-605)
Haynes 25 is a cobalt-based alloy which combines good formability
and excellent high-temperature properties. At 1800°F, Haynes 25 sheet
has a 100 hour stress-rupture strength of 7000 psi. The alloy is
resistant to oxidation and carburization to 1900°F.
Haynes 25 has given good service in many jet engine parts. Some of
these include turbine blades, combustion chambers, afterburner parts,
and turbine rings. The alloy has also been used successfully in a
variety of industrial furnace applications including furnace muffles and
liners in critical spots in high temperature kilns.
Haynes 25 (L-605) has displayed excellent resistance to the hot
corrosive atmospheres encountered in certain jet engine operations.
Resistance to oxidation is good for intermittent service up to 1600°F
and continuous service up to 2000°F.
Haynes 25 (L-605) is highly resistant to scaling and oxidation at
elevated temperatures, with particularly good qualities under extreme
oxidizing conditions.
This material also possesses excellent resistance to chemical
oxidizing agents, and extraordianry resistance to hydrochloric and nitric
acids at certain concentrations and temperatures. Resistance to salt
spray corrosion is very good.
Specifications:
UNS: R30605
Sheet, Strip, Plate
AMS 5537
Bar, Ring, Forgings
AMS 5759
Available Product Forms: Pipe, tube, sheet, strip, plate, round bar, flat
bar, forging stock, hexagon and wire
Haynes 25 is a cobalt-based alloy which combines good formability
and excellent high-temperature properties. At 1800°F, Haynes 25 sheet
has a 100 hour stress-rupture strength of 7000 psi. The alloy is
resistant to oxidation and carburization to 1900°F.
Haynes 25 has given good service in many jet engine parts. Some of
these include turbine blades, combustion chambers, afterburner parts,
and turbine rings. The alloy has also been used successfully in a
variety of industrial furnace applications including furnace muffles and
liners in critical spots in high temperature kilns.
Haynes 25 (L-605) has displayed excellent resistance to the hot
corrosive atmospheres encountered in certain jet engine operations.
Resistance to oxidation is good for intermittent service up to 1600°F
and continuous service up to 2000°F.
Haynes 25 (L-605) is highly resistant to scaling and oxidation at
elevated temperatures, with particularly good qualities under extreme
oxidizing conditions.
This material also possesses excellent resistance to chemical
oxidizing agents, and extraordianry resistance to hydrochloric and nitric
acids at certain concentrations and temperatures. Resistance to salt
spray corrosion is very good.
Specifications:
UNS: R30605
Sheet, Strip, Plate
AMS 5537
Bar, Ring, Forgings
AMS 5759
Available Product Forms: Pipe, tube, sheet, strip, plate, round bar, flat
bar, forging stock, hexagon and wire
 |
 |
 |
 |
 |
 |
 |
| Corporate Headquarters American Special Metals, Corp. 11890 S.W. 8th Street Penthouse VII Miami, Florida 33184-1717 Telephone: (305) 551-4215; Fax: (305) 551-3436 E-Mail: info@americanspecialmetals.com |
Hastelloy and Haynes Alloys are Registered Trademarks of
Haynes International and Its subsidiaries
Haynes International and Its subsidiaries
American Special Metals is an independent distributor, and is not a representative or authorized distributor for any
manufacturer, brand or tradename, trademark listed on this site. All logos, tradenames and/or trademarks belong to their
respective holders.
American Special Metals es un Distribuidor Independiente, tanto el logo, como el nombre comercial y la marca registrada y
patentes de los productos presentados en este sitio de Internet pertenecen a sus respectivos dueños y no a nosotros.
American Especial Metals aclara no ser un representante exclusivo de los nombres comerciales o marca registrada, Todos
los logos, nombres comerciales y/o marcas registradas pertenecen a sus respectivos dueños.
manufacturer, brand or tradename, trademark listed on this site. All logos, tradenames and/or trademarks belong to their
respective holders.
American Special Metals es un Distribuidor Independiente, tanto el logo, como el nombre comercial y la marca registrada y
patentes de los productos presentados en este sitio de Internet pertenecen a sus respectivos dueños y no a nosotros.
American Especial Metals aclara no ser un representante exclusivo de los nombres comerciales o marca registrada, Todos
los logos, nombres comerciales y/o marcas registradas pertenecen a sus respectivos dueños.
